Fly-Back Chronographs
www.tissot.ch
105_E / 02.03
2/4
Usage / Settings
Models with a screwed crown
You must first unscrew the crown into position
IB
before you can pull it out into position
II
or
III.
Important : After each operation, you must always screw the crown back down to ensure that your watch remains water-resistant.
Pushers
Press briefly on the pusher to move the hands in increments. If you press for more than 1 second, the hands will move continuously (rapid setting).
Rapid correction of the date
Pull the crown out into position
II
and turn it counterclockwise until the correct date is displayed.
Congratulations
We would like to congratulate you on having chosen a chronograph from TISSOT
®
, one of the most highly renowned Swiss brands in the world. Meticulously
designed, using only the highest quality materials and components, your watch is protected against shock loads, variations in temperature, water and dust.
When operating as a chronograph, this model is able to time events lasting up to 30 minutes, displaying the results to the 1/10th of a second, and also provides
you with the following functions :
– Standard START–STOP function
– ADD function (partial times)
– SPLIT function (intermediate times)
– FLY-BACK function
To ensure that your chronograph operates with perfect precision for many years to come, we advise you to pay very careful attention to the advice provided hereafter.
This user's manual is applicable to all TISSOT
®
quartz chronographs with FLY-BACK function.
Setting the time
Crown in position III
Pull the crown to position III; the small second hand (8) stops at this point.
To set the time, turn the crown clockwise or anti-clockwise. Then, press the crown back into position I (and
tighten it down if you have a model with a screwed crown).
Important :
You will have to synchronize the internal clock time which controls the alarm whenever you set the time (see
hereafter).
8
Setting the date and time zone
Crown in position II
Turn the crown clockwise or anti-clockwise. Only the hour hand moves forwards or backwards in one hour
increments. Rapid time setting is particularly useful when changing time zones or when changing from
summer to winter time and vice versa.
Note :
The date changes just after midnight is reached.
Important :
You will have to synchronize the internal clock time which controls the alarm whenever you set the time (see
hereafter).
Synchronizing
Crown in position III
Activate the appropriate pusher in sequence:
A To synchronize the minutes
B To synchronize the hours
C To adjust – 1 hour with each press
D To adjust + 1 hour with each press
Important :
You will have to synchronize the internal clock time which controls the alarm with the analogue time displayed
by the hands whenever you set the time or change time zones.
AD
BC
8
7
2
3
1
4
6
(4 Seiten)
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern